Tải bản đầy đủ
B.1 – Australian VSPs (trunks)

B.1 – Australian VSPs (trunks)

Tải bản đầy đủ

B.1.3 Faktortel (IAX)
Peer Details
Trunk Name: faktortel
allow=g729&gsm&ulaw&alaw&ilbc
disallow=all
host=iax.faktortel.com.au
qualify=3000
secret=
type=friend
username=xxxxxx

User Details
User Context: xxxxxx
auth=md5
context=from-trunk
host=iax.faktortel.com.au
qualify=3000
secret=
type=friend
username=xxxxxx

Register String:
xxxxxx:@iax.faktortel.com.au
Faktortel supports the following codecs: ulaw, alaw, ilbc, gsm, g729. The following is
the link on the discussions for setting up Faktortel on TRIXBOX.
http://www.faktortel.com.au/support-Trixbox-settings.shtml

B.1.4 iPrimus
Primus is a strange animal. To get it to work with Trixbox requires me to do a bit of
detective work. With my partner in crime, Colin, we set out to play detective because
we need to obtain the correct credential to get Trixbox to register and to be able to
make and receive calls through Trixbox. Primus Telecom has refused to assist.
To get the necessary credentials, we cheated a little as the method was published in
the whirlpool forum http://forums.whirlpool.net.au/forum-replies.cfm?t=604015
First of all, using a browser, we need to enter the following address:
https://spconfig.voip.iprimus.net.au/SoftphoneConfigurationServer/Default.aspx?Action=LOG
IN&username=username&password=password&computerid=db7b351e57af&MAC=your

_NIC_MAC_address
Replace the bold type with your Talk Broadband username and password given to
you by iPrimus. You can get your NIC MAC address by running ipconfig /all.
When you submit that address, the following data will be displayed in your browser.
[Data] Success=1 [Settings] proxies:proxy0:display_name="02********"
proxies:proxy0:username="AU_********" proxies:proxy0:password="********"
system:auto_update:config_server_url="https://spconfig.voip.iprimus.net.au/Soft
phoneConfigurationServer/Default.aspx?Action=CONFIG&Username=username&Version=1
&MAC=$MAC$&computerid=$computerid$" audio:headset:audio_in_agc_enabled="0"
audio:speaker_phone:audio_in_agc_enabled="0" codecs:speex_fec:enabled="0"
codecs:speex_wb:other_bandwidths="24000,26000,28800,32800,40000,44000"
codecs:speex_wb:starting_bandwidth="44000"
codecs:speex_wb:usable_bandwidths="20800,24800,28800,36800,44000"
codecs:speex_wb_fec:enabled="0" proxies:proxy0:contacts_etag=""
proxies:proxy0:contacts_last_upload_failed="0" proxies:proxy0:contacts_mod="0"
proxies:proxy0:default_session_refresh_interval_in_seconds="60"
proxies:proxy0:digit_map="#1\a\a.T;match=1;prestrip=2;"
proxies:proxy0:domain="asnjla2.bw.iprimus.net"
proxies:proxy0:enable_session_timer="0" proxies:proxy0:enabled="1"
proxies:proxy0:ice_enabled="1"
proxies:proxy0:maximum_time_before_reregistration_in_seconds="1800"
proxies:proxy0:minimum_time_before_reregistration_in_seconds="20"
proxies:proxy0:override_outbound_proxy="1"
proxies:proxy0:override_sip_listen_port="0"
proxies:proxy0:override_stun_server="1" proxies:proxy0:port_range_enable="0"
proxies:proxy0:proxy="sbc01a.syd.voip.iprimus.net.au:15060"
proxies:proxy0:register="1" proxies:proxy0:reregister_in_seconds="3600"

TRIXBOX-2 Without Tears

Page 205 of 248

Note the bold highlights. These are the data that you need for your trunk setting.
Armed with the data above, you may now set your trunk setting.
Peer Details
Trunk Name: iPrimus

User Details
User Context: 02********

allow=alaw&ulaw
disallow=all

context=from-trunk
type=user

fromdomain=asnjla2.bw.iprimus.net
fromuser=AU_XXXXXXXX
host=asnjla2.bw.iprimus.net
insecure=very
outboundproxy=sbc01a.syd.voip.iprimus.net.au

port=15060
secret=YYYYYYYY
type=peer
username=AU_XXXXXXXX

Register String:
AU_XXXXXXXX@asnjla2.bw.iprimus.net:YYYYYYYY:AU_XXXXXXXX@iprimus/02********

B.1.5 MyNetFone
Peer Details
Trunk Name: MyFonesip
allow=g729&alaw&ulaw
authname=091xxxxx
canreinvite=no
disallow=all
dtmfmode=rfc2833
fromuser=091xxxxx
host=sip01.mynetfone.com.au
insecure=very
nat=yes
pedantic=no
qualify=yes
secret=
type=friend
username=091xxxxx

User Details
User Context: 091XXXXX
canreinvite=no
context=from-trunk
fromuser=091xxxxx
insecure=very
qualify=no
secret=
type=friend
username=091xxxxx

Register String:
091xxxxx@sip01.mynetfone.com.au::091xxxxx@sip01.mynetfone.com.au/091xxxxx

For further information on MyNetFone, you may refer to the following link:
http://www.myfone.com.au/downloads/sip.conf
http://www.myfone.com.au/downloads/extensions.conf

B.1.6 Nehos
Peer Details
Trunk Name: Nehos
allow=g729
disallow=all
host=sip.ifone.com.au
qualify=yes
secret=
type=peer
username=661xxxx

TRIXBOX-2 Without Tears

User Details
User Context: 661XXXX
context=from-trunk
host=sip.ifone.com.au
secret=
type=user
username=661xxxx

Page 206 of 248

Register String:
661xxxx:@sip.ifone.com.au

B.1.7 Nodephone
Peer Details
Trunk Name: Nodephone
allow=g729
canreinvite=no
disallow=all
dtmfmode=rfc2833
fromdomain=sip.internode.on.net

User Details
User Context:
context=from-trunk
host= sip.internode.on.net
secret=
type=user
username=

fromuser=
username=
host=sip.internode.on.net
insecure=very
secret=
type=peer

Register String:
:@sip.internode.on.net/

B.1.8 SipMe
Peer Details
Trunk Name: sipme
authname=1777xxxxxx
dtmfmode=rfc2833
fromuser=1777xxxxxx
host=sip.sipme.com.au
insecure=very
secret=
type=peer
username=1777xxxxxx

User Details
User Context: 1777xxxxxx
context=from-trunk
fromuser=1777xxxxxx
secret=
type=user

Register String:
1777xxxxxx:@sip.sipme.com.au/1777xxxxxx

TRIXBOX-2 Without Tears

Page 207 of 248

B.2 – NEW ZEALAND VSPS (TRUNKS)
B.2.1 iTalk
Peer Details
Trunk Name: italk
allow=ulaw&g729
canreinvite=no
context=from-trunk
disallow=all
dtmfmode=rfc2833
fromuser=64997xxxxx
host=akl.italk.co.nz
insecure=very
secret=
type=friend
username=64997xxxxx

User Details
User Context:
You may prefix outgoing
calls with 0197 to disable
outgoing CID.
Inbound route 64997xxxxx
required to be forwarded
to a destination ext/menu

Register String:
64997xxxxx:@akl.italk.co.nz/64997xxxxx
(Source Ref: Steve Biddle)

B.2.2 Double Zero 64 (IAX)
Peer Details
Trunk Name: 0064
allow=ulaw&g729
disallow=all
dtmfmode=rfc2833
host=voip.0064.co.nz
insecure=very
secret=
type=peer
username=your_Customer_ID

User Details
User Context:; Your_Customer_ID
context=from-pstn
host=voip.0064.co.nz
insecure=very
secret=PASSWORD
type=user
username=CUSTOMER_ID

Register String:
Your_Customer_ID: @voip.0064.co.nz

TRIXBOX-2 Without Tears

Page 208 of 248

B.3 – OTHER VSPS (TRUNKS)
B.3.1 Broadvoice
Peer Details
Trunk Name: Broadvoice
allow=ulaw
canreinvite=no
disallow=all
dtmfmode=rfc2833
fromdomain=sip.broadvoice.com
fromuser=
host=sip.broadvoice.com
insecure=very
nat=yes
secret=
type=peer
username=

User Details
User Context:
context=from-trunk
type=user

Register String:
@sip.broadvoice.com::@sip.broadvoice.com/

B.3.2 FWD aka Pulver(IAX)
Peer Details
Trunk Name: fwd
allow=ulaw&alaw
auth=rsa
canredirect=no
disallow=all
host=iax2.fwdnet.net
inkeys=freeworlddialup
insecure=very
secret=
type=peer
username=65xxxx

User Details
User Context: 65xxxx
auth=rsa
context=from-trunk
inkeys=freeworlddialup
type=user

Register String:
65xxxx:@iax2.fwdnet.net

B.3.3 SipBroker
Peer Details
Trunk Name: sipbroker-out
allow=g729&ulaw&alaw
canreinvite=no
disallow=all
dtmfmode=rfc2833
fromdomain=
fromuser=
host=sipbroker.com
insecure=very
nat=yes
port=5060
secret=
type=peer

TRIXBOX-2 Without Tears

You will not require
user details since you
will not be receiving
incoming calls from this
trunk.
You do not need to
register either.

Page 209 of 248